A: SPEED is a throttle response controller with an APP, capable of processing and modifying the signals thrown from the throttle pedal to the ECU. The purpose is to achieve an enhanced and safer driving experience. It improves the response of the engine, limit the acceleration and lock the pedal on the anti-theft mode. Quick and Safe Installation with 100% Plug & Play allowing to keep all stock features when uninstalled, will not leave residual codes, and can be reinstalled countless times in vehicles with similar settings.
FAQ's
1 - WHAT IS SPEED AND WHAT DOES IT DO?
2 - DO I LOSE THE VEHICLE’s WARRANTY WHEN I USE SPEED?
A: No, it will not leave residual codes, and can be reinstalled countless times in vehicles with similar settings.
3 - IF THE VEHICLE ALREADY HAS DIFFERENT MODE SETTINGS (SPORT, ECO, ETC.) FROM THE FACTORY, DOES SPEED ENHANCE EACH MODE, OVERRIDE IT, OR DISABLE IT COMPLETELY?
A: You can customize SPEED to interact with the vehicle’s factory modes and improving its stock settings but using SPEED by itself (leaving vehicle’s factory settings on stock mode) you will reach better results than combining both or using the factory alone. SPEED takes the hesitation out of the factory set up…a smoother transition in and out factory settings.
4 - CAN SPEED INCREASE FUEL CONSUMPTION?
A: No, SPEED has the ECO mode, for gentle acceleration, and consequently there can be a decrease in consumption. Fuel consumption is related to driver’s driving style.
5 - CAN SPEED INCREASE THE POWER OF MY VEHICLE?
A: SPEED intent is not to increase power but to anticipate the entry of vehicle’s power and torque.
6 - WHAT IS THE FUNCTION OF VALET MODE IN SPEED?
A: SPEED has this driving mode, which limits the acceleration of the vehicle, decreasing the rotation of the engine (rpm), no worries as the accelerator is now governed with a limiter. No joy rides or burning rubber here. Just enjoy your time because strangers can do no harm in this mode.
7 - WHAT DOES THE PEDAL-LOCK FUNCTION DO?
A: SPEED has the option to fully block the accelerator response, being on only across the app. The device will act as a blocker and the pedal will only restart by the unlock command from the APP.
8 - WHAT DO I DO IF THE PEDAL-LOCK IS ACTIVE AND MY CELL PHONE IS OUT OF BATTERY?
A: Unlocking the pedal is only achieved through the APP. If you cannot recharge your cell phone, you must uninstall SPEED, so your vehicle may get acceleration back again.
9 - CAN I CHANGE THE SPEED STAGES DURING AN ACCELERATION?
A: It is not recommended, as the speed can change the stages to any command of yourself, and due to the change in vehicle behavior, it is recommended that the accelerator is not pressed.
10 - CAN SPEED LOSE ITS PERFORMANCE AFTER A LONG PERIOD OF TIME USING IT?
A: There is not a possibility. What could happen is the driver getting used to the driving experience of SPEED. In this case, it is recommended to turn off SPEED and note the difference with and without the product.
11 - CAN I REMOVE THE SPEED BUTTON?
A: Yes, you just need to unplug the button connector. In this case, the last driving mode selected will remain. If you want to change the driving move it can be done through the SPEED APP on your phone.
12 - CAN THE SAME SPEED WORK ON ANOTHER VEHICLES?
A: SPEED can operate in another vehicle with the same type of connector, but remember that even with the same connector, it may not obtain the same result since SPEED is developed individually for each car model and not only for every model connector. In this case, please check the application compatibility guide.
13 - DOES SPEED WORK ON CARS THAT HAVE BEEN REPROGRAMMED OR HAVE POWER BOX/PLUG & PLAY?
A: Yes, SPEED works on the pedal signal, not interfering with other parameters in the injection center.
14 - HOW DO I USE THE SPEED SETTINGS?
A: SPEED has 6 driving modes which are: eco, sport, performance, track, valet and stock. Each driving mode can be customized on the sensitivity adjustments made through the SPEED APP, only.
15 - DOES SPEED LEAVE ANY RESIDUAL CODE IN THE VEHICLE AFTER UNINSTALLING IT?
A: No, it is a 100% plug and play product, it can be installed and uninstalled easily without leaving any residual codes.